How to coop edit online and portfowared

Learn more on how to use Sandbox, or submit your own tutorials or resources.
daltonds1
Member
Member
Posts: 368
Joined: September 13th, 2010, 12:26 am
Name: Dalton
IRC Username: Daltonds1
Location: Tomball, Texas

How to coop edit online and portfowared

Postby daltonds1 » October 9th, 2010, 8:54 pm

Whats port forwarding?

Port forwarding allows remote computers, for example, computers on the Internet, to connect to a specific computer or service within a private local area network (LAN).

In a typical residential network Internet access is obtained through a DSL or cable modem connected to a router or network address translator (NAT). Hosts on the private network are connected to an Ethernet switch or communicate via a wireless LAN. The NAT device's external interface is configured with a public IP address. The computers behind the router, on the other hand, are invisible to hosts on the Internet as they each communicate only with a private IP address.

Lets Start.
Forwarding is based on linksys router but you can still do the same on all other routers.
Questions below please post

First open CMD

Image

Now type
ipconfig

Image

Now at the top you will see this

Code: Select all

Ethernet adapter Local Area Connection:

   Connection-specific DNS Suffix  . :
   Link-local IPv6 Address . . . . . : ***::****:d68d:60be:bb8d%11
   IPv4 Address. . . . . . . . . . . : 192.168.*.***
   Subnet Mask . . . . . . . . . . . : 255.255.***.*
   Default Gateway . . . . . . . . . : 192.168.*.*


Find this of course there will not be any *'s
now
copy the

DON'T X OUT OF THE CMD YET

Default Gateway192.168.1.1
code
mine is
Default Gateway . . . . . . . . . : 192.168.1.1
so ill go ahead and put 192.168.1.1 into the url bar

Image

Now this should pop up

Image

Username for me is
User: Admin
Password: Admin

It could be the same for you
Just try combinations
User: Admin
Password: Leave blank

ETC ETC
If you know your parents put a user and password on router go ask it from them.

Now.. Once you are in Find applications and gaming

Image

After that you will see some empty boxes

Something like
Application........Start......End......Protocol....IP ADRESS... ENABLE

For the application box put
Sandbox
For the Start put
28785
For end put
28786
For Protocol put
UDP

For Ip address
Now open the CMD again
You see
IPv4 Address. . . . . . . . . . . : 192.168.1.100
Put the 192.168.1.100 code into the box
if the box already has 192.168.1. in there just put the last 3 digets in there
DONT PUT MINE UNLESS ITS THE SAME

For the ENABLE = check mark

------------------------------------

Now Click save..
Now we have to allow it threw the fire wall

Now Open Control Panel
Open System and security
Open Windows firewall

WINDOWS 7
Click advance settings

Others
Click allow program threw firewall

Now if you have windows 7 scroll down
For others
Click on add new
and should ask something about application name
Put Sandbox
Should ask for A Port put 28785
Then if it asks for UDP or TCP put UDP
Then re do the follow
BUT FOR PORT PUT 28786

Done

WINDOWS 7
Click inbound rules
Right click inbound rules
New rule

Click on PORT
Next
Click UDP
In the box put
28785
Allow the connection
Make sure all boxes are checked
Name = Sandbox
Now re do the follow put for the box put 28786

Should be all done now..
Any problems occur please post below

User avatar
klimyriad
Support Team
Support Team
Posts: 969
Joined: December 23rd, 2009, 1:43 pm
Name: liam
Contact:

Re: How to coop edit online and portfowared

Postby klimyriad » October 16th, 2010, 11:46 am

It will not let me put in my user name and password (I do not know what it is to be honest)
Firstspace the attack Progress. Image
Maps= Image finishing the town of hisal map.
Models and textures Image Just started finding these.
Menus, script's and other stuff. Image

daltonds1
Member
Member
Posts: 368
Joined: September 13th, 2010, 12:26 am
Name: Dalton
IRC Username: Daltonds1
Location: Tomball, Texas

Re: How to coop edit online and portfowared

Postby daltonds1 » October 16th, 2010, 12:51 pm

why you mean its not letting you?

If its not its usually just admin admin

User avatar
klimyriad
Support Team
Support Team
Posts: 969
Joined: December 23rd, 2009, 1:43 pm
Name: liam
Contact:

Re: How to coop edit online and portfowared

Postby klimyriad » October 16th, 2010, 2:59 pm

NOPE i try again.
Firstspace the attack Progress. Image
Maps= Image finishing the town of hisal map.
Models and textures Image Just started finding these.
Menus, script's and other stuff. Image

User avatar
klimyriad
Support Team
Support Team
Posts: 969
Joined: December 23rd, 2009, 1:43 pm
Name: liam
Contact:

Re: How to coop edit online and portfowared

Postby klimyriad » October 16th, 2010, 3:08 pm

Ermm when i type my i.p in now the popup does not work.
Firstspace the attack Progress. Image
Maps= Image finishing the town of hisal map.
Models and textures Image Just started finding these.
Menus, script's and other stuff. Image

daltonds1
Member
Member
Posts: 368
Joined: September 13th, 2010, 12:26 am
Name: Dalton
IRC Username: Daltonds1
Location: Tomball, Texas

Re: How to coop edit online and portfowared

Postby daltonds1 » October 17th, 2010, 11:57 am

Are you using the IP from like ipchicken.com? or in CMD

User avatar
klimyriad
Support Team
Support Team
Posts: 969
Joined: December 23rd, 2009, 1:43 pm
Name: liam
Contact:

Re: How to coop edit online and portfowared

Postby klimyriad » October 17th, 2010, 1:04 pm

No these forums.
Firstspace the attack Progress. Image
Maps= Image finishing the town of hisal map.
Models and textures Image Just started finding these.
Menus, script's and other stuff. Image

daltonds1
Member
Member
Posts: 368
Joined: September 13th, 2010, 12:26 am
Name: Dalton
IRC Username: Daltonds1
Location: Tomball, Texas

Re: How to coop edit online and portfowared

Postby daltonds1 » October 17th, 2010, 1:49 pm

Use the IP from cmd like in the tut

cool1bird
Member
Member
Posts: 10
Joined: October 24th, 2010, 7:01 pm

Re: How to coop edit online and portfowared

Postby cool1bird » October 24th, 2010, 7:43 pm

Nevermind i fixed my problem

User avatar
rev1
Member
Member
Posts: 136
Joined: September 19th, 2009, 9:36 am
Name: Jorick
Location: Over here

Re: How to coop edit online and portfowared

Postby rev1 » November 9th, 2010, 11:36 am

I have D-Link, can you maybe help me filling in this?

Image


Return to “Tutorials and Resources”

Who is online

Users browsing this forum: No registered users and 2 guests