Platinum Arts Sandbox - Free 3D Game Maker Forum

Sorry if this is posted somewhere, but I never found it, so I'm posting it myself.

How to make doors 02 and 03 open (step by step)

1. create and place the door model your going to use.

2. click on the door to select it

3. type in this code:

/entset mapmodel

(when you have this typed, you have to type in the YAW number for your door. {the dirction it will face} then the model number {door 02 is model 110, door 03 is 111} then you add on the number that makes the door open at a certain range {10 works best} finally, you'll need to add on the last 5 numbers {i just use 5 zeros and it works right})

4. after all that your code should look like this:

/entset mapmodel 90 110 10 0 0 0 0 0

when you enter this, the door will now open when you get neer it.



heres, the simple version of what I just said:

/entset mapmodel 90{YAW} 110{model} 10{range} 0{blank} 0{blank} 0{blank} 0{blank} 0{blank}

this took me a while to get right.


NOTE:

if you see a white ring below your door after you use the code, you did everything right.

NOTE 2:

I checked this on a few other things like elevators and such and made it work for those too.

Thanks for the contribution MetalLocked.

10 is not the distance, it is the trigger type. You might want to update your post or I can. Here is the list of the trigger types:
http://sandboxgamemaker.com/platinumart ... _mapmodel_

Take care.
-mike

This didn't work for me... what's the correct code? Cause it shows the trigger type and stuff, but I can't walk through it.

This was from earlier version, about two years ago. I doubt it would work on 2.7, sorry to tell you.

triggers work the same as always in the FPS

Hirato wrote:triggers work the same as always in the FPS

Yeah, but you have to be in singleplayer.

Nothing has ever been updated in FPS since 2009? DAAAAAAAANNNNNGG!!!

really, since 2009?

BlackGulf wrote:really, since 2009?

Yup.